| Model | Outer frame diameter (mm) | Screen diameter (mm) | Screen mesh | Layer | frequency (min) | power (KW) |
| CF-GPS-600 | 600 | 550 | 2-800 | 1 | 3000 | 0.55 |
| CF-GPS-800 | 800 | 760 | 2-800 | 1 | 3000 | 0.75 |
| CF-GPS-1000 | 1000 | 950 | 2-800 | 1 | 3000 | 1.1 |
| CF-GPS-1200 | 1200 | 1150 | 2-800 | 1 | 3000 | 1.5 |



High-frequency vibrating screen, also known as high-frequency vibrating screen, is composed of exciter, screen frame, frame, suspension spring and screen mesh. The high-frequency vibrating screen adopts a cylindrical eccentric shaft exciter and an eccentric block to adjust the amplitude. The material screen has a long flow line and a variety of screening specifications. It has reliable structure, strong excitation force, high screening efficiency, low vibration noise, sturdy and durable, Features such as convenient maintenance and safe use, high-frequency vibrating screens are used in product classification in food, medicine, chemical, new energy and other industries.Materials: yeast, glaze, liquid paint, waste water treatment, filter grease, mud, waste water, waste oil, paint, ink, colorant, paint, Latex paint, aluminum powder slurry; starch, soy milk, fruit juice, beverages, dairy products, condiments; pulp, waste liquid, Chinese and Western medicine liquid.1. Frequency: The vibration frequency of the high-frequency vibrating screen is about 50HZ. It is precisely because of this high-frequency vibration that the material can be quickly separated, which is suitable for materials with high slurry concentration. 2. Angle: the installation angle of the screen machine is convenient and adjustable, and the installation inclination angle of the wet screening in the concentrator is generally 25±2°1. When the equipment is in normal operation, the ore feeding concentration of the sieve should be observed frequently, and the concentration should be controlled at about 40% in order to improve the classification efficiency. 2. Because the screen has high classification efficiency, good dewatering performance and high concentration of over-screen amount, the slurry in the over-screen amount chute has poor fluidity, so it should be equipped with a water pipe. 3. The electromagnetic exciter and the control box should be strictly protected from water to avoid short circuit. Cover the exciter with a rubber sheet to prevent water and slurry from falling in, causing short circuits and blocking air gaps. 4. Check whether the bolts of various parts are loose at any time, and whether the screen frame collides with the chute. 5. Always pay attention that the pointer of the ammeter cannot exceed the rated value. When the screen machine is running for about half a month, the current value should be adjusted to near (usually 8-9A) and vibrated for 4-5 minutes, so as to shake off the objects on the back of the screen. 6. The excitation current (amplitude) can be adjusted according to the nature of the ore and the operation requirements. In order to make the sieve work under the condition of high efficiency, the excitation current condition test can be done.